|
 |
|
 |
| |
BORING SPINDLES
BORING SPINDLES
BORING SPINDLES
GUNDRILLING SPINDLES
FACING SPINDLES
MILLING SPINDLES
|
|
CHARACTERISTICS:
* The manual compensation structure is as precise as the automatic ones, please refer to the characteristics of auto tool compensation.
* The compensation is operated by manual spinning disk, no control motor needed.
* The spinning gear is equipped with T ditch micro switch and base for stopping, make sure the breakage is unloaded (for further step, wait for the next movement signal.
| Type |
ATCOM70D |
ATCOM90D |
| Gear dia |
O15～90 |
O30～120 |
| Maxi. RPM |
3,300min-1 |
2,500min-1 |
| Maxi. compensation |
0.15mm/ Diameter |
| Compensation for each stroke |
1μm/ Diameter |
| Repeat static for precision |
0.5μm/ Radius |
| Tool breakage release |
Approx. 0.05mm/ Radius |
| Compensation cylinder dia |
O80(Pressured Area 44cm2X Stroke15mm) |
| Compensation cylinder moving pressure |
Oil pressure1.2～2.0MPa(12～20kgf/cm2) |
| Approx. weight |
86kg |
123kg |
|
|
CHARACTERISTICS:
* The compensation structure tool is thinly designed, the part of the front spindle to tool breakage is the shorter the better.
* There is no need to assemble the compensation structure, the gear distance is applicable to a wide range of machine from minimum to maximum.
* A simple compensation structure to maintain the static precision.
* The spinning gear cutting of the compensation motor allows the spindle RPM to maximum capacity.
* The slide adaptor can be efficiently adjusted to straight-line movement for the ideal compensation.
* Tool breakage stopped when work completed.
| Type |
ATCOM70C-1-2 |
ATCOM90C-1-2 |
| Gear dia |
O15～90 |
O30～120 |
| Maxi. PRM |
3,300min-1 |
2,500min-1 |
| Possible setting compensation |
1～9μm/ Dia |
| Accumulated maxi. cutting compensation |
0.15mm/ Dia |
| Repeat static precision |
0.5μm/ Radius |
| Tool breakage release |
Approx 0.05mm/ Radius |
| Compensation cylinder dia |
O60(Pressured area 23.4cm2X stroke30mm) |
| Compensation cylinder moving pressure |
Oil Pressure1.8～2.5MPa(18～25kgf/cm2) |
| Stroke motor |
23PM-C108 |
| Approx. weight |
190kg(1 Type)
155kg(2 Type) |
240kg(1 Type)
190kg(2 Type) |
|
|
|
|
|
|