|
 |
|
 |
| |
CHARACTERISTICS:
RP5-151 TYPE ／BROTHER * The spindle gear is made of steel alloy and grinded precisely for a surface under 0.6s.
* The multi-plug is used for spindle drive gear to prevent from the damage of surface, a high loading is bearable while spinning.
* The thickly made spindle between spinning gear supported by high reliability and performance.
* The correction duty is controlled by 4 spinning gears and can be operated easily.
* There is a prevention device for double pieces inserting at the slot.
* An emergency stop device is equipped for over loaded.
OTHER TYPES／HINOTEX * Various types to meet the requirement of multi-purpose flattening.
* An emergency stop device and touch switch are equipped at the slot (for prevention of inserting of double pieces and hands)
* An emergency stop is equipped for overload.
* NC control type makes more convenient adjustment.
| Model |
Standard Type |
Capacity
(Max t) |
Slot width
(mm) |
Spindle diameter
(mm) |
Number of spindle |
Motor
(KW) |
Manual operation |
Auto operation |
Supporting |
Weight
(kg) |
Digital number demonstration |
Remarks |
| TRP-150 |
0.3～3.2 |
150 |
19 |
19 |
0.75 |
○ |
○ |
○ |
215 |
----- |
|
| HR-55LN |
3.2 |
300 |
54 |
15 |
2.2 |
○ |
★ |
----- |
600 |
★ |
|
| HR70S |
6.0 |
300 |
70 |
9 |
2.2 |
○ |
★ |
----- |
700 |
★ |
|
| HR-70LN |
60 |
300 |
74 |
17 |
3.7 |
○ |
○ |
----- |
2500 |
★ |
|
| HR-70LW |
4.5 |
600 |
74 |
17 |
5.5 |
○ |
○ |
★ |
3500 |
★ |
|
| HR-100S |
9.0 |
350 |
89 |
9 |
3.7 |
○ |
○ |
----- |
2400 |
★ |
|
| HR-100W |
6.0 |
600 |
89 |
9 |
5.5 |
○ |
○ |
★ |
3200 |
★ |
|
| HR-120S |
12.0 |
400 |
120 |
9 |
5.5 |
○ |
○ |
----- |
3500 |
★ |
|
| HR-120W |
9.0 |
600 |
120 |
9 |
7.5 |
○ |
○ |
★ |
4500 |
★ |
|
| HR-150ST |
19.0 |
300～500 |
150 |
9 |
7.5 |
○ |
○ |
----- |
4500～5000 |
★ |
|
| HR-200SP6 |
25.0 |
400 |
200 |
6 |
11.0 |
○ |
○ |
----- |
6000 |
★ |
Produced by order |
| HR-250SP6 |
40.0 |
300 |
240 |
6 |
15.0 |
○ |
○ |
----- |
7500 |
★ |
Produced by order |
| HR-100PW |
3.2 |
1500～2500 |
104 |
10 |
11.0～15.0 |
○ |
○ |
○ |
----- |
★ |
Produced by order for wider type only |
HR-80Y
Cross |
3tX25
～10tX65 |
80 |
7 |
2.2 |
○ |
○ |
----- |
1800 |
★ |
Produced by order |
※ ☆☆When using SUS the max. width is 1/2. ★This symbol shows selective function. |
|
|
CHARACTERISTICS:
WITHOUT POMP
* This product adopts vacuum ejector. only through compressor can work.
* Even Machine had inhaled cooling oil. cooling water or rubbish etc. Vacuum Chuck also can exclude them.
* Vacuum Chuck had improved many times and machine to simplify. So less breakdown and easy to maintain.
FOR AVAILABLE ALL PROCESS PRODUCTS
* Work well for up layer process. side process grinding.
* Assist metal using. special shape products process also easy to drill work.
AT WILL TO ADJUST SIZE
* According to size of process products to change assemble and adjust machine.
* According to process products size to place station.
CRISIS
* Vacuum chuck use vacuum press to clamp products and to process.
W=PXS x 0.1 W(kg) S=Inhale area(cm2) ) P=(mmHg)
* Vacuum press and size of area.
* Air supply should keep steady.
* Before process products should clean.
* Seal condition and density whether excellent
* The clamping area and ventilation
* Warmth, humidity and curved condition of products.
| Type |
A |
B |
C |
D |
Exhausted air |
Max. suction |
Weight |
AC
VAC |
VCI
VCIM |
| VCIM-150 |
150 |
170 |
200 |
10.0 |
23 |
12 |
7 |
9.2 |
| VCIM-150-2 |
150 |
300 |
330 |
10.0 |
23 |
12 |
13 |
13.7 |
| VCIM-150-6 |
300 |
450 |
480 |
10.0 |
46 |
24 |
30 |
37 |
| VCIM-200 |
200 |
200 |
230 |
13.5 |
46 |
24 |
9 |
12.1 |
| VCIM-200-2 |
200 |
400 |
430 |
13.5 |
46 |
24 |
17 |
22.2 |
| VCIM-200-4 |
400 |
400 |
430 |
13.5 |
46 |
24 |
34 |
42.5 |
| VCIM-200-6 |
400 |
600 |
630 |
13.5 |
92 |
48 |
51 |
62.7 |
| VCIM-250 |
250 |
250 |
280 |
15.0 |
78 |
40 |
12 |
16.4 |
| VCIM-250-2 |
250 |
500 |
530 |
15.0 |
78 |
40 |
24 |
30.6 |
| VCIM-250-4 |
500 |
500 |
530 |
15.0 |
78 |
40 |
50 |
59.2 |
| VCIM-250-6 |
500 |
750 |
780 |
15.0 |
156 |
80 |
75 |
87.8 |
| VCIM-300 |
300 |
300 |
330 |
18.0 |
78 |
40 |
17 |
21.2 |
| VCIM-300-2 |
300 |
600 |
630 |
18.0 |
78 |
40 |
32 |
40.3 |
| VCIM-300-4 |
600 |
600 |
630 |
18.0 |
78 |
40 |
64 |
78.6 |
| VCIM-300-6 |
600 |
900 |
930 |
18.0 |
156 |
80 |
96 |
116 |
|
|
|
|
|
|