|
 |
|
 |
| |
Characteristics:
* Scale on processing surface provides accurate and easy determination of position.
* Can avoid backlash of feeding automatic.
* Accurate setting of tapping depth.
* There is setting method of drilling depth.
* Operating the handle to outside, in any position. Spindle will turn back, And you get easy tapping.
| Type |
SJ-550 |
| Capacity |
Swing |
550mm |
| From table to spindle end |
Max. 750mm Min.30mm |
| From base to spindle end |
Max. 1135mm Min.915mm |
| Drilling capacity |
(S45C)40mm, (FC20)50mm |
| Boring capacity |
(S45C)M24, (FC20) M30 |
| Spindle |
Taper of spindle nose |
M.T. No. 4 |
| Spindle stroke |
Man. 220, Mech. 180, Tap.180 |
| Speed (rpm) |
50Hz |
60, 85, 110, 135, 180, 235, 340, 440, 575, 740, 960, 1270 |
| Speed (rpm) |
60Hz |
75, 100, 130, 165, 215, 285, 405, 530, 690, 890, 1150, 1525 |
| Number of spindle feed |
3 |
| Feed rate (mm/rev.) |
0.1, 0.2, 0.3 |
| table |
Working area (Diameter) |
510mm |
| Travel |
500mm |
| T-Slot (Nominal dimension) |
16mm |
| Spindle motor (kw-p) |
1.5-4 |
| Base mounting area |
500mmx900mm |
| Overall height |
2200mm |
| Net weight |
650kgs |
|
|
|
|
|
|