|
 |
|
 |
| |
Mechanical characteristics：
1. Low energy, consumption less, low noise.
2. High speed, high output, high efficiency.
3. Easy precise adjustment of oil pressure, punch location , and
working lowest point
4. Addtional accessories：safety light curtain. die clamp.robot arm.
and feeder.
5. Control mold：auto PLC control. buttons operated by both hands simulatneously. punch home-return on hand-off. double pressing prevention.
6. Capable of being using as individual operation or one of the serial automatic manufacturing system.
7. Safety operation by both hands simulatneously, punch returns to original position as soon as hands off delay between two hands less than 0.3 secs.
Mechanical using：
1. Tubing enlarging and reducing.
2. Punching, stamping, forming, and cutting.
3. Drawing and bending.
4. Riveting, piercing, and typing.
5. Thin plats shear through all or half.
6. Components inserting, such as anti-vibrating nut.
|
|
Characteristics:
* These units save energy because of using both electric driving electric and air feeding. (Cutting feed speed is controlled hydraulically.)
* It is easy to set full stroke and rapid stroke by adjusting knob.
* The six different spindle speeds are available by simply replacing the interchangeable pulley.
* Motor is protected by built-in thermostat.
* Unique design of the independent throttle rod system eliminates any bending moment to the quill.
* These unites contain the oil reservoir inside, which minimizes the oil supplies.
* Aluminum die casting housing give the great rigidity and light weight compact design.
| |
AF1-112(AF1-112S) |
AF2-126(AF2-126S) |
| Max. drilling capacity |
Ø8 |
Ø9 |
| Spindle nose taper |
J.T.1 |
J.T.6 |
| Spindle Whole
Stroke: mm |
80 |
120 |
| Drilling Feed
Stroke: Max. mm |
50 |
90 |
| Requested Rapid
Feed Stroke : Min. mm |
30 |
| Spindle speed 60Hz(rpm) |
6000, 4000, 2700, 1800, 1200, 800 |
5000, 3550, 2500, 1800, 1250, 900 |
| Drilling Feed
Rate: mm/sec |
0.4～ 20 |
| Thrust Power
(As 5 Kgf /cm2G air Pressure) |
100(kgf) |
150(kgf) |
| Working air pressure (kg) |
5 kgf/cm2G |
| Drive Motor
Power |
3 Phases, 2 Poles 200W |
3 Phases, 2 Poles 375W |
| Net weight |
15(kgf) |
31(kgf) |
|
|
|
|
|
|