|
 |
|
 |
| |
|
pneumatic |
hydraulic |
pneumatic |
hydraulic |
pneumatic |
hydraulic |
pneumatic |
hydraulic |
pneumatic |
hydraulic |
hydraulic |
| TD3-60(TD3-60N) |
TD3-80 |
TD5-85 |
TD6-130 |
TD7-130 |
TD8-150 |
TD9-150 |
| Max. drilling capacity(mm) |
Ø6(S45C) |
Ø6(S45C) |
Ø10(S45C) |
Ø16(S45C) |
Ø18(S45C) |
Ø25(S45C) |
Ø35(S45C) |
| Spindle nose taper (mm) |
JT1, JT2,
ER-16 |
JT1, JT2,
ER-16 |
JT6,
ER-20 |
JT6, MT2,
ER-20 |
JT6, MT2,
ER-20 |
MT3A, MT3B, ER-40 |
NT40, NT40A, FB30 |
| Max
travel of spindle (mm) |
60 |
80 |
85 |
130 |
130 |
150 |
150 |
| Cutting feed stroke (mm) |
25、50 |
60 |
25、50 |
80 |
25、50 |
85 |
25、50 |
130 |
25、50 |
130 |
150 |
150 |
| Spindle speed (rpm) |
12000 |
10500 |
6000 |
3200 |
3200 |
1500 |
1250 |
| Cylinder dia |
Forward 12.6cm2
Backward 7.1cm2 |
Forward 12.6cm2
Backward 7.1cm2 |
Forward 21.6cm2
Backward 11.6cm2 |
Forward 43.2cm2
Backward 30.6cm2 |
Forward 43.2cm2
Backward 30.6cm2 |
Forward
71.2cm2
Backward
44.8cm2 |
Forward
71.2cm2
Backward
31.4cm2 |
| Motor rating |
2 Phases, 2/4 Poles 220/380w |
|
| Working pressure (kg) |
5 |
10 |
5 |
10 |
5 |
20-25 |
5 |
20-25 |
5 |
20-25 |
20-25 |
20-25 |
| Net weight |
20 (kg) |
22 (kg) |
42 (kg) |
32 (kg) |
32 (kg) |
55 (kg) |
65 (kg) |
| The above air-hydraulic machines equipped with a 25mm long stabilizer. |
|
|
Mechanical characteristics：
1. Low energy, consumption less, low noise.
2. High speed, high output, high efficiency.
3. Easy precise adjustment of oil pressure, punch location , and
working lowest point
4. Addtional accessories：safety light curtain. die clamp.robot arm.
and feeder.
5. Control mold：auto PLC control. buttons operated by both hands simulatneously. punch home-return on hand-off. double pressing prevention.
6. Capable of being using as individual operation or one of the serial automatic manufacturing system.
7. Safety operation by both hands simulatneously, punch returns to original position as soon as hands off delay between two hands less than 0.3 secs.
Mechanical using：
1. Tubing enlarging and reducing.
2. Punching, stamping, forming, and cutting.
3. Drawing and bending.
4. Riveting, piercing, and typing.
5. Thin plats shear through all or half.
6. Components inserting, such as anti-vibrating nut.
|
|
|
|
|
|